Site managed, and products distributed in Australia, by MRT Performance

Increase Power and torque

Did you know that your car is detuned!
Unlock the hidden potential of factory ECU's

Learn more Power & Torque

Improve reliability, economy

100% money back satisfaction
Guarantee National Warranty

National Dealer Network

Worlds Number 1 here in Aus

Mitsubishi (UK with the FQ models)
Cosworth (USA and UK)
Subaru (UK with the Prodrive models)
Learn more Tuning Software

EcuTeck Performance Products - Australia's No.1 Ecu

ECU Software

Mazda Diesel

Mazda Diesel

Mazda Diesel supports Mazda Diesel vehicles from 2006 onwards, fitted with the Denso engine ECU.

Both the 2 & 2.2 litre MZR-CD engines are supported for Mazda vehicles 3, 5, 6 & CX7.

Model Year Engine Capacity (litre) Power (PS)
3 2006- 2.0 / 2.2 121/143/150/185
5 2006- 2.0 / 2.2 121/143/150/185
6 2007- 2.0 / 2.2 121/143/150/185
CX7 2008- 2.0 / 2.2 143/185

20 ECU versions are currently supported from all regions.

Mazda Diesel Features

Mazda Diesel provides access to a wide range of calibration options for the OEM ECU, such as:

  • Fuel Injection Quantities
  • Fuel Pressure
  • Boost Control
  • Torque Control
  • Injection Quantity Limiters
  • Turbo Dynamics Control
  • Sensor Scaling
  • Rev Limiters
  • Speed Limiters
  • High speed CAN datalogging including DPF related parameters
  • DPF Tool, including Force DPF Regeneration feature
  • Injector Coding Tool
  • Oil Service Counter Reset Tool

Tests have shown that for the the 2007 model 2.0ltr Mazda 6, power can eassily be increased from 143bhp to 175bhp. Correspondingly, torque can be raised from the standard 270lbs.ft (360Nm) to over 300lbs.ft (400Nm+).
 
Furthermore, the 150PS 2009 2.2ltr Mazda 3 can be tuned to 190PS with over 450Nm Torque, outshining the factory 185PS model.

Sensor calibration parameters for intakes and exhaust systems mean the ECU can be safely tuned for whatever the hardware can produce, providing you with a huge range of tuning options.

Mazda Diesel Map list


Supported Vehicles

Mazda Diesel currently supports over 14 different ECU versions.

EcuTek ProECU Mazda Diesel vehicles:

  • Mazda 3 Diesel 2.0 ltr - 2007 onwards
  • Mazda 3 Diesel 2.2 ltr - 2009 onwards

  • Mazda 5 Diesel 2.0 ltr - 2006 onwards

  • Mazda 6 Diesel 2.0 ltr - 2007 onwards
  • Mazda 6 Diesel 2.2 ltr - 2009 onwards


Tuning Results

Our development vehicle, a Mazda 3 2.2 Litre 2010, saw an increase of 41BHP (30KW) and 70 ft/lb (95Nm) of torque taking the standard car to 339 ft/lb (462Nm).




Live Data

When connected to a car, ProECU Mazda Diesel can offer real time data and map tracing.
The following data is available from the 'Live Data' tab of the ROM file being accessed. This data is accessed directly from the ECU in real time.

  • RPM: Engine speed. (Revolutions Per Minute)
  • Fuel Rail Pressure
  • Exhaust Gas Temp
  • Wastegate Duty
  • DPF Regeneration
  • Equivalence Ratio – Lambda

The below screenshots shows some example data for 30 out of approximately 95 live data parameters:

It is possible to log the data shown during Map Access mode for analysis in DeltaDash or ProECU.
It is then possible to customise the way the logged data are displayed using the Time Graphs, Data Table, Custom 2D Graphing, and Custom 3D Graphing tabs in the Log Viewer, as shown below:




Mazda Diesel Tools

ProECU provides a specific Mazda Diesel ECU tool allowing you to perform Oil Ratio Resets, Fuel Pump Reset and DPF Pressure Sensor Reset. The newer 2010 2.2 Litre models also have a read & write injector codes function for injector calibration. Further features for DPF reset and re-installation are currently in development.


Force DPF Regeneration

This can be used to manual force a regeneration of the Diesel Particulate Filter (DPF/FAP).

Install New DPF

Used when installing a new DPF filter.

Reset Oil Ratio

This important tools is required after an oil change service. This prevents the warning light on the dashboard.

ETB/EGR Initialisation

Electronic Throttle Body (ETB) and Exhaust Gas Recirculation (EGR) Initialisation should be used after installing new ETB or EGR parts.

ECU Reset

This tool will reset all learnt and initialised values.

Reset Tools

Learnt values for the Fuel Pump, Injectors, MAF Sensor and the O2 Senor can be reset.

Read and Write Injector Codes

This tool allows for the correct configuration of new injectors.

Mazda

ProECU Mazda Tuning Suites

EcuTek ProECU Mazda Tuning Suites support the following vehicles:

Mazda DISI - Mazda DISI MZR 2.3 Turbocharged Engines

Mazda DISI Tuning tools support the 3MPS, 6MPS, CX-7, 8MPV, Axela and Mazdaspeed models with the 2.3 litre MZR turbo engine from 2005 onwards.

Mazda MX5 - Mazda MX5 Gen3 (NC) 1.8 and 2.0 litre.

Mazda MX5 tuning tools support the 3rd generation Mazda MX-5 1.8 and 2.0 litre engines from 2005 onwards.

Mazda Diesel - Mazda Diesel 2.0 & 2.2 litre Diesel 2007 onwards.

Mazda Diesel tuning tools support the 2.0 and 2.2 litre Mazda Diesel engines from 2006 onwards.

FlashCAN Nissan GTR

Supported Vehicles:

JF01C - JDM Nissan GTR 2008

JF01D - JDM Nissan GTR 2008

JF30A - US Nissan GTR 2008

F30C - US Nissan GTR 2008

JF51A - EU Nissan GTR 2009

JF60A - EU Nissan GTR 2009

JW93A - EU Nissan GTR 2010

JW99A - ME Nissan GTR 2010

KB54B - EU Nissan GTR 2011

R5116 - EU Nissan GTR 2010

Performance Books